Dual - Station Heat Press Machine Wizardry: 40*60, Unleash Creativity at Lightning Speed

• Customization: Available
• After-sales Service: Online Technical Support
• Warranty: 1 Year
• Model NO.: GS-043
• Type: Heat Press Machine
• Plate: Flat Printing
• Structure: Platen Press
• Color & Page: Multi-Colour Printing Press
• Printing Speed: 10min
• Automatic Grade: Semi-Automatic
• Plate Type: Platen Press
• Voltage: 110V/220V/3.5kw
• Temperature Range: 0-399℃
• Packing Size: 178*93*88
• Weight: 230kg
• Transport Package: Wooden Packing
• Specification: 60*80
• Trademark: goosam
• Origin: China
• Production Capacity: 10000pieces/Year

Product Description

Size

60*80

Applcation

HEAT PRESS MACHINE

Summary:

A heat press machine is the machine that presses a transfer onto an printable substrate . Using high temperatures and pressures for a certain amount of time, the transfer is permanently embedded into the product. Heat presses are recommended for professional and satisfying results simply because standard laminating devices and home hand irons can't get even near the temperatures required for a reliable transfer.

Please Note:

1. Be careful of the hot heating surface

2. Please make sure the heating temperature and transfer time are correct

3. In order to extend the service life of this machine, please turn the machine off for 15 minutes after 4. using it continuously for 4 hours.

5. You may refer to "Suggested Time and Temperature" chart to determine the suitable temperature and time according to the material.

6. Each time you put through power supply and turn power switch on, the heater will take some time to warm up to reach the target temperature for the first press.

COMMON PRINTING FAILURES and THEIR POSSIBLE REASONS:

1. The color is lighter: the temperature is too low; OR the pressure is not even; OR the time is too short.

2. The design is indistinct: the time is too long which led to ink diffusion.

3. The design has no luster: the pressure is too high; OR the temperature is too high.

4. Part of design is indistinct: heat printing zone OR the heating is not even.

5. Scar on design: heat printing time is too long.

6. Depth of color is not the same: pressure not even OR the coating is not even.

7. Paper stick to the object: the temperature is too high; OR the coating of the object is not good.

8. Please do not set the temperature to more than 250°C or it will shorten the service life of the machine.

Instructions for Using the Heat Press Machine:

1.Preparation
Check if the power supply of the heat press machine is in good condition, and place it on a stable, heat-resistant tabletop.
Lay the clothes to be ironed flat, smooth out the wrinkles, and if there are stubborn stains, it is recommended to clean them first.
2.Power on and adjust temperature
Plug in the power, turn on the switch, and select the temperature according to the fabric of the clothes (refer to the marks on the machine: such as low temperature for chemical fiber, high temperature for cotton and linen).
Wait for the indicator light to turn on (or a prompt sound), which indicates that the temperature has reached the set value.
3.Start pressing and ironing
Gently lower the pressure plate of the heat press machine, cover the wrinkled part of the clothes, and keep it for 3-10 seconds (longer for thick fabrics, shorter for thin fabrics).
Lift the pressure plate, move to the next wrinkled area, and repeat the operation. Avoid staying in the same position for too long to prevent scalding the clothes.
4.End operation
After ironing, turn off the switch and unplug the power.
Store the machine in a dry place after it has completely cooled down.

Tips: When unsure about the temperature resistance of the fabric, first test ironing on an inconspicuous part of the inner side of the clothes to avoid damaging the clothes.

Goosam Company Information:

12+    Years in printing ink industry
100+   Countries Exported
30+    Experienced staffs 24/7 Service & 2 independent production lines
99%    5 Star customer rate 
30      Tons Ink production capacity per Month
1:1    Replace Defective Ink
 Goosam leading products:DTF Ink, DTF Film, DTF Powder, DTF Printer, DTG Ink, DTG Printer, Sublimation Ink, Sublimation Paper, Sublimation Printer,Heat Transfer Vinly, Uv Ink, Uv DTF Film, Uv Printer, Eco Solvent Ink, Dye Ink, Pigment Ink, Invisible Ink, Art Paper Ink, Riso Ink Cartridge, Ink Chip, Other Printer Parts.
 Goosam was established in 2012, based in Shenzhen, is not only one of the best printing ink suppliers, but also a professional one-stop printing solution problem solver with high quality ink, printers and skilled specialists.